altium14~15如何利用WEBENCH® Design Center仿真
本帖最后由 chinajiagege 于 2014-11-25 15:09 编辑从最新的AD15.0中发现在可以利用WEBENCH® Design Center进行仿真——有关微博如下：
Announcement: FREE TI WEBENCH® Altium Connector Extension
Dan Fernsebner
, Jun 03, 2014
Hi Everyone,
I’m very pleased to announce the release of another great 3rd party extension for Altium Designer, the WEBENCH® Altium Connector.
The WEBENCH® Design Center and WEBENCH® Simulation Engine assist enormously with the development of power, lighting, filtering, clocking and sensing designs. Allowing you to generate, optimize and simulate designs, while making the necessary value-based tradeoffs to meet your design and supply chain requirements.
The free WEBENCH® Altium Connector provides both an interface to the online WEBENCH® Design Center and an offline interface to the WEBENCH® Simulation Engine, allowing the following:
Access WEBENCH® Design Center from Altium Designer and optimize your design.
Export that design from WEBENCH® to Altium Designer.
Simulate any circuit using the fast WEBENCH® Simulation Engine from Altium Designer.
Details about using this extensions can be found in Altium Techdocs, here and more about WEBENCH® from Texas Instruments can be found here. Below are installation and licensing instructions.
Kind Regards and Thanks,
Dan
*****************************************************************************************************************************************************
Installation and Setup
The extension is visible to subscription customers from Altium Designer, DXP > Extensions and Updates > Purchased. A WEBENCH® license from Texas Instruments is required.
Installing License for WEBENCH® Simulation Engine:
When you run the WEBENCH simulation engine for first time on a design, it will ask for a node license.
Attach the logfile showing the WBSE license not found and send an email to wbse@ti.com for a license. This file is needed for generating a WEBENCH® Simulation Engine license.
Once license is received, rename the license file as "node_license" (if not already done) and place it in <WEBENCH Extension Installation Directory>\WBSE.
Usually you will find it in c:\ProgramData\Altium\Altium Designer {2F259E6B-E4FF-4EB4-9ABC-063D5507D841}\Extensions\WEBENCH\WBSE\node_license
You are ready to use the WEBENCH® Simulation Engine.
Note: The received license file may have some extension associated with it. The license file must be renamed to "node_license", removing any extension if present.
上面看起来很简单：
1.确保你的AD有能用的license ，这是在网上很多，破解的也行，试用的license 也罢，只要能用就OK.
2.正常运行AD15(AD14也可以)：按如下操作
Add / remove modules can:
a) Run the installer again and choose to update an existing installation
b) of Altium Designer (DXP -> My Account -> Extensions & Updates -> Platform -> Configure)这里可以查看你是插件配置情况
c ) Extensions (Software Extensions, Hardware Devices) are installed and removed from the
Altium Designer (DXP -> My Account -> Extensions & Updates)——————）：》在这里会发现有WEBENCH插件，点击安装。如果你是正式 altium客户，这个插件是从官方网下载的，如果你是吊丝这个插件应你在你的下载离线安装包里。确保联网。
装好后，reset DXP
3.打开 % ProgramData% \ Altium \ Altium Designer {<GUID>} \ WEBENCH \ WBSE \ Examples下的项目文件，如图你会发现惊喜：
4.能看见WEBENCH 在altium菜单。然后---》》》》Start the simulation WEBENCH。运行后会提示没有license ，这时点击打开错误提示，其实就是TI的个网页：http://webench.ti.com/appinfo/webench/scripts
申请成功后如下：
5.这时要用IT的账户登陆(没有自己申请一个)，获取 simulation WEBENCH 的激活吗。获取激活码后，再回到AD15激活WEBENCH功能---如下图操作：
如上动画如示操作。再回到原来打开的WEBENCH的项目文件，可仿真运行，没提示错误。
有不明白的加QQ：子懿chinajaigege@qq.com(1926075398) 赞 {:lol:} 有空了看看 {:lol:}{:lol:}{:victory:}{:victory:}{:victory:} 链接：http://pan.baidu.com/s/1c0cVWPU 密码：2oma;AD15--Evgeny972---版本------你懂的{:lol:}{:lol:}{:lol:}
链接：http://pan.baidu.com/s/1ETKdw 密码：ohxd;altium Unifed components20140808_----官方更新器件库{:lol:}{:lol:}{:lol:}{:lol:}{:lol:}
链接：http://pan.baidu.com/s/1pJsO9on 密码：zhba ；STM32 PMSM FOC控制算法集合 {:victory:}{:victory:}{:victory:}{:victory:}{:victory:}
有效效期1一个月 谢楼主分享、、 chinajiagege 发表于 2014-11-26 09:02
链接：http://pan.baidu.com/s/1c0cVWPU 密码：2oma;AD15--Evgeny972---版本------你懂的{ ...
漂亮………… chinajiagege 发表于 2014-11-26 09:02
链接：http://pan.baidu.com/s/1c0cVWPU 密码：2oma;AD15--Evgeny972---版本------你懂的{ ...
本来路过看一下关于ALtium15的，却发现了FOC，简直是双重福利！下下来研究一下。。 chinajiagege 发表于 2014-11-26 09:02
链接：http://pan.baidu.com/s/1c0cVWPU 密码：2oma;AD15--Evgeny972---版本------你懂的{ ...
好人呐
能破解否，个人应用，你懂得 福利{:lol:} 好人啊，能否再共享一下您百度网盘的《STM32 PMSM FOC控制算法集合》，原来提供的链接已过期。谢了。 好的，晚上回去恢复 cocom 发表于 2016-1-28 23:13
好人啊，能否再共享一下您百度网盘的《STM32 PMSM FOC控制算法集合》，原来提供的链接已过期。谢了。 ...
http://pan.baidu.com/share/link?shareid=302506365&uk=1292554117 一周有效 非常感谢！！！！好人呢。 谢谢chinajiagege分享. chinajiagege 发表于 2016-2-18 15:57
http://pan.baidu.com/share/link?shareid=302506365&uk=1292554117 一周有效
你好，请问能否再分享一周，谢谢！ chinajiagege 发表于 2016-2-18 15:57
http://pan.baidu.com/share/link?shareid=302506365&uk=1292554117 一周有效
有好人能够共享一下么？ chinajiagege 发表于 2016-2-18 15:57
http://pan.baidu.com/share/link?shareid=302506365&uk=1292554117 一周有效
能不能再发一次啊，
非常感谢！！！！
chinajiagege 发表于 2016-2-18 15:57
http://pan.baidu.com/share/link?shareid=302506365&uk=1292554117 一周有效
能否再分享一次？ 请教题外话，gif用什么软件做的。
页:
[1]