ISE11.3的问题
下了ISE11.1还有11.2,11.3先装11.1一路升级到11.3，然后在license configuration manager 那里一直不动，等很久也动不了，一直显示 鼠标沙漏；
无奈，删了11.3重装，
先装11.1然后把那个11.1的LIC包进来。然后装11.2 11.3升级，把那个11.1的LIC直接删了用11.3的LIC替换，没有在license configuration manager选11.3的license，11.3的那里一直是鼠标沙漏， 等很久多 SET 多是灰白的，关了。
启动ISE11.3 ,有很多错误
ERROR:PersonalityModule:7 - Unable to open Xilinx data file for Vendor/Device Module "xc9500xl".Please make sure that it has been correctly installed before continuing.
FATAL_ERROR:StaticFileParsers:StaticAcdRead.c:640:1.55 - ACD file .acd does not exists
Process will terminate. For technical support on this issue, please open a WebCase with this project attached at http://www.xilinx.com/support.FATAL_ERROR:StaticFileParsers:StaticAcdRead.c:658:1.55 - Unable to load file or override file "".
Process will terminate. For technical support on this issue, please open a WebCase with this project attached at http://www.xilinx.com/support.INTERNAL_ERROR:PersonalityModule:baspmspec.c:1751:1.79 - Could not load definition file <xc9500xl.acd>
有用11.3的朋友吗？ 有。用生成器生成的license，使用正常。生成器好像坛子里有 朋友在把？QQ147479023
页:
[1]