|
|
更新内容:
Version 4.78
•DLL: Added support for Cortex-R5 devices.
•DLL: Added support for Fujitsu MB9BF16xx, MB9BF36xx, MB9BF46xx, MB9BF56xx devices.
•DLL: Added support for STM32F401xB and STM32F401xC devices.
•DLL/J-Flash: Added support for Analog Device CM40x series.
•DLL/J-Flash: Added support for Energy Micro Zero Gecko series.
•DLL/J-Flash: Added support for Atmel SAM4E series devices.
•DLL/J-Flash: Added support for Infineons Econometer series (UMF1110, UMF1120, UMF5110, UMF5120).
•DLL/J-Flash: Added support for Toshiba TMPM440 series.
•DLL/J-Flash: Added support for Texas Instrument TM4C and TM4E series.
•DLL/J-Flash: Added support for Fujitsu FM4 series.
•J-Flash: Options -> Project settings -> Flash now shows absolute sector addresses in detailed sector view.
•J-Flash: Added sample projects for Atmel SAM4C and SAM4E series devices.
•J-Flash: Added sample projects for Analog Device CM40x series.
•J-Flash: Added sample projects for Energy Micro Zero Gecko series.
•J-Flash: Added sample projects for Infineons Econometer series.
•J-Flash: Added sample projects for Texas Instrument TMS570LS, RM42 and RM46 devices.
•J-Flash: Added sample projects for Texas Instrument TM4C and TM4E series.
•J-Flash: Added sample projects for Toshiba TMPM440 series.
•J-Flash: Max. selectable RAMSize to be used by J-Flash for programming, extended to 512 KB (for devices which provide that much RAM).
•Firmware: J-Link V9: Added virtual COM port support. Note: Can only be used when debugging via SWD target interface. (Pin 5 = JLink-Tx, Pin 17 = JLink-Rx)
•J-Link Commander: Added "mem64" command.
•GDB Server: Added FINE to interface selection.
•Linux package: libusb is no longer necessary to be installed.
•Linux package: Installer packages (.deb and .rpm) created.
更完整的信息可以去SEGGER官网查看.
我的JLink V8 用的JLink EDU版的SN,自动更新固件,MDK,IAR调试OK.
没有权限上传这么大的文件,放百度网盘
http://pan.baidu.com/share/link? ... 2&uk=1445924889
|
阿莫论坛20周年了！感谢大家的支持与爱护！！
曾经有一段真挚的爱情摆在我的面前，我没有珍惜，现在想起来，还好我没有珍惜……
|
发表于 2013-11-21 19:35:24
