|
自制的usb blaster
硬件:FT245BL+EPM3064
软件:Quartus 11.0
逻辑是网上流传已久的程序
现在发现;
jtag下载正常
as下载正常
但是在调试nios时,比如对一个工程进行run as on hardware时,到最后总是提示:
Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Pausing target processor: OK
Reading System ID at address 0x01002038:
ID value verified
Timestamp value does not match: image on board is newer than expected
Read timestamp 2:11:29 2012/03/26; expected 18:16:09 2011/11/07
The software you are downloading may not run on the system which is currently
configured into the device. Please download the correct SOF or recompile.
Restarting target processor
换成别的blaster就正常,这是怎么回事? |
阿莫论坛20周年了!感谢大家的支持与爱护!!
知道什么是神吗?其实神本来也是人,只不过神做了人做不到的事情 所以才成了神。 (头文字D, 杜汶泽)
|