发现个雕刻机

DIYaihao · 发表于 2011-9-3 19:50:20

center>

(原文件名:雕刻机-1.jpg) </center>

(原文件名:雕刻机-2.jpg)

(原文件名:雕刻机-3.jpg)

gaods · 发表于 2011-9-4 10:55:07

漂亮。

xiao2xu5 · 发表于 2011-9-4 12:10:03

价格不菲、、、、、、、、

daisuz · 发表于 2011-9-4 13:10:38

有图却没真相啊

funnynypd · 发表于 2011-9-4 23:30:59

>价格不菲、、、、、、、、

For all the components it used and it is made in USA, it is a good bargain.

funnynypd · 发表于 2011-9-5 00:06:01

CNC Oliver IntelliCarve 1013
USD $2076;
13inchx18chx3inch (330.2mmx457.2mmx76.2mm);
tool shank od=1/4inch or 6mm;
max cutting depth 1inch,
spindle speed 15K RPM, 150W DC brushless;
Stepper Motor:1.8degree, 1.25ft-lb torque,
accuracy4milx4milx0.4mil (0.1mmx0.1mmx0.01mm);
standalone LCD display controller, USB2.0 2G;
Overall dimension: 25inchx22inchx21inch;
gross weight:122 lbs.
Ball type lead screws, aluminum table,

3rocks · 发表于 2011-9-5 00:07:17

http://www.olivermachinery.net/index.php?node=machines&model=1015
$3600
http://cgi.ebay.com/OLIVER-1015-INTELLICARVE-CNC-ROUTER-BRAND-NEW-/380322271737#vi-desc

funnynypd · 发表于 2011-9-5 00:07:34

CNC Oliver Intellicarve 1015 USD $3600;
15inchx20inchx4inch (381mmx508mmx101.6mm),
tool shank od=1/4inch or 6mm; max depth of tool 1 inch;
feed speed:8cmx8cmx2.5cm/min;
spindle speed 23K RPM, 500W DC brushless;
1.8degree step anlge,
3milx3milx0.1mil (0.075x0.075x0.025mm)accuracy;
LCD display, USB port,
33inchx43inchx27inch overall dimension,
260 lbs gross weight.
Ball type lead screws, aluminum table,

funnynypd · 发表于 2011-9-5 00:08:41

I didn't realize they are selling this machine on ebay?

funnynypd · 发表于 2011-9-5 00:12:05

1013 and 1015 are the only two CNC machines Oliver make.
And it seemed they spend extreme effort to improve the accuracy on Z axil(claimed to be 0.4mil and 0.1mil), x and y are only 4mil and 3 mil accuracy.

3rocks · 发表于 2011-9-5 00:12:54

Brand New 3525 Model Desktop CNC Router
from China
$2550
http://www.ebay.com/itm/Brand-New-3525-Model-Desktop-CNC-Router-/160440383252?_trksid=p4340.m263&_trkparms=algo%3DSIC%26its%3DI%252BC%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D15%26pmod%3D380322271737%26ps%3D63%26clkid%3D2545445320728824011

funnynypd · 发表于 2011-9-5 00:20:27

1013 is slightly larger and cheaper than the one from China.

CNC Oliver IntelliCarve 1013
USD $2076;
13inchx18chx3inch (330.2mmx457.2mmx76.2mm);

There are a few Youtube video online too. These two Oliver machines Look build right.

Eric.Hu · 发表于 2011-9-5 11:18:16

英语角？不好意思，我走错了。

KiraVerSace · 发表于 2011-9-5 11:22:04

。。。。English corner

543437628 · 发表于 2011-9-6 22:33:52

应该好贵的！

发现个雕刻机

阿莫论坛20周年了！感谢大家的支持与爱护！！

浏览过的版块