谁来拯救我的128，烧不进程序
我有两块芯片，用同样的JTAG下载线和studio软件，其中一块芯片工作正常，另一块芯片下载时提示：AVR Studio has detected that the target device is locked for programming.
To be able to degug, a chip erase must be performed to clear the lock bits.
To lock the device again ,the lock bits will have to be programmed manually.
Click Ok,or Cancle to abort~~
单击确定，提示如下
JTAG ICE: Warning: Execution stopped on boot loader reset vector.
JTAG ICE: Warning: Boot reset fuses are programmed, but the program entry function is located in the application section. Wrong boot reset fuses will probably cause erronous execution.
JTAG ICE: Warning: If this is not an error, this check can be disabled in the 'Debug' section in the JTAG ICE options.
请教版主，什么原因造成这个编程位被锁定的结果，该怎么办，谢谢！急！！！！！！！
请说的详细些，本人比较菜 本栏中有解救方法的帖子,请找一下参考.
页:
[1]