wshini7316 发表于 2015-2-25 09:27:28

imx6q android4.4起来之后过一会就会报错重启?

打印信息如下:
root@sabresd_6dq:/ #
root@sabresd_6dq:/ #
root@sabresd_6dq:/ #
root@sabresd_6dq:/ # binder: release 2658:2668 transaction 75728 in, still active
binder: send failed reply for transaction 75728 to 14724:14791
binder: release 2658:2778 transaction 75725 in, still active
binder: send failed reply for transaction 75725 to 14724:14789
binder: release 2658:14720 transaction 75692 out, still active
binder: release 2658:14722 transaction 75729 in, still active
binder: release 2658:14722 transaction 75727 out, still active
binder: send failed reply for transaction 75729 to 2791:2801
binder: 2311:2704 transaction failed 29189, size 60-0
binder: 14724:14791 transaction failed 29189, size 96-0
binder: 2791:2801 transaction failed 29189, size 408-0
binder: send failed reply for transaction 75727, target dead
binder: 14724:14791 transaction failed 29189, size 80-4
binder: 14724:14789 transaction failed 29189, size 164-0
alarm_release: clear alarm, pending 0
request_suspend_state: wakeup (0->0) at 97181808348 (1970-01-02 00:01:18.7899163
43 UTC)
binder: release 2311:2704 transaction 75692 in, still active
binder: send failed reply for transaction 75692, target dead
init: untracked pid 2779 exited
init: untracked pid 2803 exited
init: untracked pid 2855 exited
init: untracked pid 2867 exited
init: untracked pid 2791 exited
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs




不知道为什么他总是这样重启。

FSL_TICS_Rita 发表于 2015-3-2 15:32:27

楼主你好,关于你帖中出现的ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!这种现象,是这样,在你的板子设计中有一些模块你没有用到的话,在你的内核中你没有去掉,所以在启动过程中就会遇到你帖中的问题。建议你在内核中把没有用到和设计的部分去掉。

wshini7316 发表于 2015-3-4 16:11:16

FSL_TICS_Rita 发表于 2015-3-2 15:32
楼主你好,关于你帖中出现的ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found ...

问题已经解决了谢谢。

FSL_TICS_Rita 发表于 2015-3-4 17:12:39

wshini7316 发表于 2015-3-4 16:11
问题已经解决了谢谢。

不客气的,欢迎有问题继续在本论坛中交流讨论哈~~
页: [1]
查看完整版本: imx6q android4.4起来之后过一会就会报错重启?