wshini7316 发表于 2014-11-19 11:37:58

imx6q uboot通过sd卡加载kernel的时候出现Card did not respond to volt...

imx6q uboot通过sd卡加载kernel的时候出现Card did not respond to voltage select!

Hit any key to stop autoboot:0
Card did not respond to voltage select!
mmc2(part 0) is current device

MMC read: dev # 2, block # 2048, count 8192 ... Card did not respond to voltage
select!
MMC: block number 0x2800 exceeds max(0x0)
0 blocks read: ERROR
Wrong Image Format for bootm command
ERROR: can't get kernel image!

步之道 发表于 2014-11-19 12:41:39

这套硬件以前是否烧写成功过？如果原理没有问题，应该是硬件问题。

qufuta 发表于 2014-11-19 13:24:11

楼主可以换张卡试试

wshini7316 发表于 2014-11-19 17:33:43

qufuta 发表于 2014-11-19 13:24
楼主可以换张卡试试

MMC read: dev # 1, block # 2048, count 8192 ... 8192 blocks read: OK
## Booting kernel from Legacy Image at 10800000 ...
   Image Name:   Linux-3.0.35-2666-gbdde708-g8f1f
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3925108 Bytes =3.7 MB
   Load Address: 10008000
   Entry Point:10008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
页: [1]
查看完整版本: imx6q uboot通过sd卡加载kernel的时候出现Card did not respond to volt...