afei8856 发表于 2013-7-26 17:29:32

ISE的JTAG连接错误，怎么回事？

ERROR:iMPACT - A problem may exist in the hardware configuration. Check that the cable, scan chain, and power connections are intact, that the specified scan chain configuration matches the actual hardware, and that the power supply is adequate and delivering the correct voltage.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.

wwwlanmin 发表于 2013-7-26 22:03:23

路过路过路过哦

zkf0100007 发表于 2013-7-26 23:02:09

英文提示说的很清楚，检查电缆连接是否可靠，供电电压是否正常

afei8856 发表于 2013-7-29 15:43:10

zkf0100007 发表于 2013-7-26 23:02 static/image/common/back.gif
英文提示说的很清楚，检查电缆连接是否可靠，供电电压是否正常

买的烧写器的问题，线缆连接错误，害的我好苦啊
页: [1]
查看完整版本: ISE的JTAG连接错误，怎么回事？