xts 发表于 2012-9-21 10:48:19

uVision4碰到定时器TH0，TR0，TL0编译错误

uVision4碰到定时器TH0，TR0，TL0编译错误有两个
1.can't initialize, bad type or class
2.not in formal parameter list
请问一下知道的，碰到过的，是什么问题啊？

xts 发表于 2012-9-21 11:16:57

#include<reg52.h>
然后也把文件包含进入了，还是不通过。真奇怪

yihui184 发表于 2012-9-21 11:29:54

没见过啊！

xts 发表于 2012-9-21 11:33:12

xts 发表于 2012-9-21 11:16 static/image/common/back.gif
#include
然后也把文件包含进入了，还是不通过。真奇怪

是滴水效果的流水灯的程序，不加定时器没啥问题。
使用了定时器的程序就出现了好多变量无法找到定义了。再看看，不知道是不是程序问题

millwood0 发表于 2012-9-21 19:00:45

再看看，不知道是不是程序问题

how's that possible? your code cannot be the problem. it must be something else.








:)

seriously, if it took you so long to realize that, you have a huge problem.

xts 发表于 2012-9-24 10:05:05

millwood0 发表于 2012-9-21 19:00 static/image/common/back.gif
how's that possible? your code cannot be the problem. it must be something else.




I find the answer it's the code problem-http://www.amobbs.com/thread-5255872-1-1.html
Timer can hardly generate PWD.

millwood0 发表于 2012-9-24 18:31:32

Timer can hardly generate PWD.

but they are pretty good at generating KOB.
页: [1]
查看完整版本: uVision4碰到定时器TH0，TR0，TL0编译错误