xixi222 发表于 2012-5-23 11:48:04

一个ARM做的视频服务器报错

一个ARM做的视频服务器报错：
SD card init error !!1
insmod: cannot insert `/kmod/extdrv/sd.ko': No such device or address (-1): No s
uch device or address
高手看看是什么意思？

xixi222 发表于 2012-5-23 11:49:32

刚开始是这样的：
HiBoot 1.1.2.1 (May 14 2007 - 22:17:15)

HiBoot code: 60500000 -> 60519EECBSS: -> 605543DC
RAM Configuration:
Bank #0: 60000000 64 MB
Flash:8 MB
LOGO disabled.
In:    serial
Out:   serial
Err:   serial
MAC:   
Hit any key to stop autoboot:0
## Booting image at 34080000 ...
   Image Name:   jblinux
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1411428 Bytes =1.3 MB
   Load Address: 60a00000
   Entry Point:60a00000
   Loading Kernel Image ... OK

kelp 发表于 2012-5-23 12:15:13

无法加载sd卡的驱动，看下这个文件是不是存在/kmod/extdrv/sd.ko

xixi222 发表于 2012-5-23 16:09:04

本帖最后由 xixi222 于 2012-5-23 16:47 编辑

原来是我没登陆成功，现在登陆成功后显示如下信息：
HiBoot 1.1.2.1 (May 14 2007 - 22:17:15)

HiBoot code: 60500000 -> 60519EECBSS: -> 605543DC
RAM Configuration:
Bank #0: 60000000 64 MB
Flash:8 MB
LOGO disabled.
In:    serial
Out:   serial
Err:   serial
MAC:   
Hit any key to stop autoboot:0
microseven #

xixi222 发表于 2012-5-23 16:48:41

做如下设置后，不联网。
microseven # setenv serverip 192.168.1.55
microseven # setenv ipaddr 192.168.1.56
microseven # setenv netmask 255.255.255.0
microseven # setenv gatewayip 192.168.1.1
microseven # saveenv
Saving Environment to Flash...
Un-Protected 2 sectors
Erasing Flash...Erased 2 sectors
Writing to Flash... done
Protected 2 sectors
microseven # ping 192.168.1.1
Using Up port.
SFBuf: 0x60580000 - 0x605CBFFF
MAC:   
Configuring network: +
ping failed; host 192.168.1.1 is not alive
页: [1]
查看完整版本: 一个ARM做的视频服务器报错