erqixiaoma 发表于 2010-12-6 19:45:11

proteus 与keil Uvision4调试问题求助！

我在keil Uvision4里面写了一小段测试IO引脚的程序，运行以后IO引脚电平可以周期性的变化。但是我将生成的HEX文件装到proteus里面时，运行后引脚并没有输出，显示FTL。我的处理器是LPC2101，其中引脚：V3 V3A接3.3V电源，V18接1.8V电源，VSS VSSA均接地，有复位电路和晶振电路。请帮忙分析一下原因！

millwood0 发表于 2010-12-6 20:00:51

"VSS VSSA均接地，有复位电路和晶振电路。"

none of that is needed for Proteus.

there are some problems either with certain versions of Proteus or Keil. You will need to compile it with a different compiler, or use a different proteus, or delete the 2nd to the last line in the .hex file for it to work.

itom1900 发表于 2011-2-26 10:43:49

回复【1楼】millwood0
-----------------------------------------------------------------------

你这方法DOESN'T WORK A
页: [1]
查看完整版本: proteus 与keil Uvision4调试问题求助！