RADIO的液晶如何设置?
我SVN更新了最新的程序,改了个MAC地址后下载到板子上液晶就没显示了,提示入下:SystemInit......
mem test pass!!
\ | /
- RT - Thread Operating System
/ | \ 0.3.1 build Nov 19 2010
2006 - 2010 Copyright by rt-thread team
part, begin: 70144, size: 1.851GB
FLASH ID: BF 25 41match SST25VF016
SPI File System initialized!
SD File System initialized!
Invalid LCD ID:00008989
Please check you hardware and configure.
/resource/remote.txt open succeed.
decode succeed,The remote enable
rtc is not configured
please configure with set_date and set_time
Thu Jan1 00:00:00 1970
dm9000 id: 0x90000a46
finsh>>event size: 28
event size: 20
event size: 28
event size: 20
operating at 100M full duplex mode
Acquired IP address from DHCP server:192.168.152.104
TCP/IP initialized!
stat -> stopped
SystemInit......
mem test pass!!
\ | /
- RT - Thread Operating System
/ | \ 0.3.1 build Nov 19 2010
2006 - 2010 Copyright by rt-thread team
part, begin: 70144, size: 1.851GB
FLASH ID: BF 25 41match SST25VF016
SPI File System initialized!
SD File System initialized!
Invalid LCD ID:00008989
Please check you hardware and configure.
/resource/remote.txt open succeed.
请教如何才能怎么设置回来? 正在试 LCD_VERSION, 不知道对不对 LCD型号选择: SSD1289 从1到3都选过了,不行 回复【2楼】aozima
lcd型号选择: ssd1289
-----------------------------------------------------------------------
好,那应该是3,我再编译一次试试,谢谢 好了,不知道为什么,一定要选Full erase才行
页:
[1]