rror connecting to the target:
rror connecting to the target:Error 0x80000200/-1031
Fatal Error during: OCS,
Device driver: Problem with the Emulation Controller.
It is recommended to RESET EMULATOR.This will disconnect each
target from the emulator.The targets should then be power cycled
or hard reset followed by an emureset and reconnect to each target.
Sequence ID: 0
Error Code: -1031
Error Class: 0x80000200
I/O Port = 240
Board Name: F2812 ICETEK-XDS1000 Emulator_1
Cpu Name: CPU_1
Abort: Close Code Composer Studio.
Retry: Try to connect to the target again.
Cancel: Remain disconnected from the target
Diagnostic: Run diagnostic utility.
用的瑞泰的DSP，为什么老是仿真器连不上CCS?
页:
[1]