wince启动问题？？？求助！！
我的wince启动不了，打印信息如下：各位大侠帮我分析一下是什么原因？我都找不到具体那里出错了，各位不知道有没有什么好的方法，请教一下！！谢谢了！还有我想问一下其中的红色字体部分的信息正常吗？Windows CE Kernel for ARM (Thumb Enabled) Built on Aug 3 2010 at 14:18:06
ProcessorType=0920 Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8c201280
INFO: Initializing system clock(s)...
INFO: Initializing driver globals area...
SDMMC config current rGPGCON: ff05cd8a
SDMMC config set rGPGCON: ff25cd8a
SDMMC config Init Done.
OEMInit Done...
KERNELFINDMEMORY
Booting Windows CE version 5.00 for (ARM)
Configuring: Primary pages: 7892, Secondary pages: 0, Filesystem pages = 3946
Booting kernel with clean memory configuration:
Memory Sections:
: start: 8e02a000, extension: 00002000, length: 01ed4000
Sp=ffffc7cc
OEMSetRealTime: Year: 2003, Month: 9, Day: 1, Hour: 12, Minute: 0, second: 0 rcn
r=1h
r=1h
cond: 0 rcnr=1h
Prescaler:2
384 clock
DeviceFolder::LoadDevice!Enumerate Found depr
ecated load instructions at (Drivers\BuiltIn\AFD). Driver cannot be unloaded.
Dev
iceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Drivers\B
uiltIn\PPP). Driver cannot be unloaded.
::: PBT_InitializeAddresses - Success
DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at (Driver
s\BuiltIn\SDBusDriver). Driver cannot be unloaded.
charlie::SDIO::SDHOST::S
DCSDCardDllEntry::DLL_PROCESS_ATTACH
::: SYSINTR_SDMMC OEMInterruptDisable
::: SYSINTR_DMA0 OEMInterruptDisable
::: SYSINTR_SDMMC_CARD_DETECT OEMInterruptEnable
::: SYSINTR_SDMMC_SDIO_INTERRUPT OEMInterruptEnable
Data Abort: Thread=8fcbf374 Proc=8e026370 'gwes.exe'
AKY=00000009 PC=0004d184(gwes.exe+0x0003d184) RA=000555f8(gwes.exe+0x000455f8) B
VA=08000008 FSR=00000007
Unhandled exception c0000005:
Terminating thread 8fcbf374
页:
[1]