ml07077 发表于 2009-4-2 19:39:42

DIY 简易型的 PLC 可看这个http://cq.cx/ladder.pl

http://cq.cx/ladder.pl

nenggx 发表于 2009-4-2 19:53:57

谢谢！记下

xiaozhiyong 发表于 2009-4-2 23:06:06

梯形图编译软件？

liheming 发表于 2009-4-7 12:15:51

http://cq.cx/ladder.pl网站里的LDMicro单片机梯形图编译软件，我用PROTEUS试过，用Atmega8也做过实验,根本不能用.不知道还有哪位朋友试过，想交流一下．

ml07077 发表于 2009-4-7 15:28:59

I would appreciate any bug reports. The following chips are supported and tested:

PIC16F877
PIC16F876
PIC16F628
ATmega64
ATmega128
The following chips are supported but not tested; they should work, but no guarantees. If you try one and it works then I would appreciate a success report:

PIC16F88
PIC16F819
ATmega162
ATmega32
ATmega16
ATmega8
页: [1]
查看完整版本: DIY 简易型的 PLC 可看这个http://cq.cx/ladder.pl